A380 Airbus R/C Plane EPO Airframe version.
*Airframe version is not included the servos, the above picture is for reference*
-This EPO A380 wingspan is 1520mm and flying with four 56mm ducted fans.
-Pre stick water slide decals
- shine surface finished.
-light and economical to fly with its large size, only requiring a 3,000mAh 11.1V battery.
Specifications:
Length: 1410mm (55.51in)
Wing span: 1520mm (32.677in)
Flying weight: 1800g
Duct Fan Unit: 4 x 56mm (Shaft adaptor not included)
Steerable nose gear: Yes
Duct fan unit included the housing and 6 blade impeller, but not included the shaft adaptor, buyer required use you own motor with a suitable size shaft adaptor with your motor, the connection end to the impeller is 4.5mm.
Required:
Radio system: 4 CH or up Ailevator or Elevon mixing function and use the Y wire which comes with the kit and according to the user manual stated how to connection.(this information update on 15-12-2009 after flying test)
As the test, We fly it while elevator up, aileron up, elevator down, aileron down.
Motor: 4 x 3200KV Brushless motor, motor body not large then 23 mm (Not included)
ESC: 4 x 25A(Not included)
Servo: 5 x 9g (Not included)
Battery: 3000mAh 3S1P 20C (Not Included)
********************************************
Optional parts available you may need
Motor
If you feel inconvenience to find suitable motors for this jet, this 3500kv motor is your right choice
This Motor is the original motor of RTF/Receiver Ready verion
It comes with the pre installed shaft adaptor, it is very convenience to you
2.3mm or 3mm shaft adaptor
This shaft adaptor you may consider use for your own motor which is 2.3mm or 3mm motor shaft. Both size is available.
If you have selected the motor as additional item, this adaptor is no need because the motor is comes with the original adaptor.
4 x extra impellers
4 x Outter ring with bottom plate
This outter ring is able to fix the motor much firmly into the housing, also decrease heat; decrease vibration and enhance the strength of the duc fan unit. As long as the motor body of in-runner or the motor base of out-runner is 20mm.
The picture show the example how to use it with the original motor of this A380, and one in-runner motor which is 20mm body.
The bottom plate may not to use if the shaft adaptor is not enough lenght to fit the impeller while use this bottom plate, otherwise the impeller will not truning smooth, the picture below is mere an example
Shipping weight: 3.7KG
** This product packing size are restricted by 41 countries ship by Air Parcel. These countries MAY ship by EMS. However, some countries also can not ship by EMS for this item. Please contact me for enquiry if you see your country in the following link.
To Know Which countries:-
Click here
| Available Options: |
| 4 x 2826 3200KV motors :-: |
|
| 4 x extra impellers: |
|
| 4 x outter rings with bottom pla: |
|
| 4 x shaft adaptors: |
|
|
